Products
Automatic Spring Torque Tester Model:PRO-T series
Patent (PAT.4090398) is obtained as it shows high ability of repeatability of torsion spring tester.
It tends to occur for testing torsion springs that testing result is uneven because of testing speed and angle setting conditions. Automatic torsion spring tester will minimize such problems with its full-automated testing process.
Characteristics
The position of XY table and rotating table are displayed on the screen by numeric information detected by digital scale
If you use PRO-TS type, measurement of torque and load and required angle by setting torque or load can be easily measured.
Range of acceptance and OK/NG judgment is displayed by bar graphic. It achieved quality control by sound and visual.
The position of load pin and support pin is automatically calculated and displayed on the screen.
The rotating table has a variable holding chuck and convenient for holding guide pin with different diameter
Prompt testing by Model number function that memorizing measurement conditions and standard tolerances.
Specifications
Model | PRO-TS-5ON | PRO-TS-100N | PRO-TS-500N |
---|---|---|---|
Capacity | 3 N・m | 6 N・m | 20 N・m |
Capacity | 50 N | 100 N | 500 N |
2 Step Auto swich-over for torque capacity | 50N/5N | 100N/10N | 500N/50N |
Load div | 1mN | 1mN | 10mN |
Torque div. | 0.001N・mm | 0.001N・mm | 0.01N・mm |
Unit | N, gf, kgf,Ibn | ||
Test Speed | 10~ 1800 deg/min | ||
Measurment coil over dia | Ø50 | ||
Moving length for load detection(Y-axia) | ±25mm | ||
Measurement Arm length(X-axia) | 60mm | ||
Measurement angle | 0.1 ~7200.0 deg | ||
Deflection direction | Turn left and Turn right | ||
Dimension | W550×D450×H520mm | ||
Max Power Consumption | 200VA | ||
Weight | 75Kg | ||
Power | AC 1OOV (50/60Hz). (AC200V: E 型) |